Sikafloor® MultiDur WT-18
Sikafloor® MultiDur WT-18 is a textured, coloured, water-based epoxy floor coating system.
- Low VOC emissions
- Low odour
- Seamless
- Good resistance to specific chemicals
- Good mechanical resistance
- Easy application
- Good water vapour permeability
- Low maintenance
Utilizare
Sikafloor® MultiDur WT-18 is used in industrial buildings such as:- Storage areas
- Assembly halls
- Manufacturing facilities and workshops
- Logistics facilities and warehouses
- The System may only be used for interior applications.
- The System may only be used by experienced professionals.
Avantaje
- Low VOC emissions
- Low odour
- Seamless
- Good resistance to specific chemicals
- Good mechanical resistance
- Easy application
- Good water vapour permeability
- Low maintenance
Culoare
Cured system colour | Available in various colour shades. |
Aspect
Textured, semi-gloss finish
Detalii Sistem
Structura sistemului
Sikafloor® MultiDur WT-18
| Product | Layer | |
| 1. | Primer | Sikafloor®-2510 W + 10 % water by weight |
| 2. | Top coat | Sikafloor®-2510 W Sika® Extender T Quartz sand (0.3–0.8 mm) |
Sistemul de bază chimic
Water-based epoxy
Grosime nominală
0.4 mm to 0.6 mm
Aderență prin încercarea la smulgere
≥ 1.5 MPa | (EN 1542) |
Aplicare
Temperatura ambientală a aerului
Maximum | +30 °C |
Minimum | +10 °C |
Umiditatea relativă a aerului
Maximum | 75 % r.h. |
Punct de rouă
Refer to the individual Product Data Sheet.
Temperatura suportului
Maximum | +30 °C |
Minimum | +10 °C |
Conținut de umiditate în suport
Refer to the individual Product Data Sheet.
Timp de așteptare / Reacoperire
Before applying Sikafloor®-2510 W on Sikafloor®-2510 W, allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 48 hours | 7 days |
+20 °C | 20 hours | 6 days |
+30 °C | 10 hours | 3 days |
If relative air humidity is ≥ 75 % the waiting time is increased by at least 24 hours.
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Produsul aplicat este utilizabil după
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 48 hours | 5 days | 10 days |
+20 °C | 20 hours | 3 days | 7 days |
+30 °C | 10 hours | 2 days | 5 days |
Note: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Consum
Function | Product | Consumption |
Primer | Sikafloor®-2510 W + 10 % water | 0.15–0.2 kg/m² |
Top coat | 1–2 × Sikafloor®-2510 W + 2 % Sika® Extender T + 3 % Quartz sand (0.3–0.8 mm) | 0.2–0.3 kg/m² per layer |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.